|
WRCROVER 18-05-2002, 12:50 Hi again Dr dave, Took the 200 to a mechanic and he says he give the throttle bodies and such a going over, hasn't done the funny idel thing since so fingers crossed. cheers, Warren.:) :) :) :) :D Dr Dave 18-05-2002, 19:59 Hi Warren Glad it seems to be OK for the moment :) If it plays up again, you may have to look towards the MEMS ECM. I can't help it; I'm a pessimist >=( MGZT 19-05-2002, 12:19 Can't you just reset the MEMS to sort this out? turn the key to position 2 and push the accelerator pedal to the floor 5 times, wait 20 seconds and then start the engine. Dr Dave 19-05-2002, 12:27 Yep, that will help to a degree but to reset the idle speed adaptions you will need your car T4'd WRCROVER 23-05-2002, 13:28 its back, but less so, and normally just does it for a few seconds and then settles at about 950rpm, i think i'll give that pushing the accelerator to the floor 5 times stunt and pray that it works, ps there is something wrong with the bloody drivers door lock, seems to be slipping sometimes takes a few goes to open, central locking still works fine though, any ideas?? Cheers warren. =P Dr Dave 23-05-2002, 20:47 200 locks? You have remote CDL? There should be no need to use the 'manual' locks, surely? Otherwise there could be a linkage/latch fault >=( | |