gringo_steve
27-05-2002, 16:54
Dr Dave
Im worried that when I get my ZS someone gonna try and nick my wheels and ***** around with my spoiler/key my car. I want to upgrade the alarm to be tilt sensitive, and maybe even have perimeter sensors. Is there any way of doing this or do I need to buy a new alarm?? Does anyone have any prices/experience on this.
I don't want some scall driving around in his xr3 with his trousers tucked in his rockport and my extreme spoiler bosticked onto his boot.
I hate scalls
Thanks
Steve
Steve Taylor
27-05-2002, 18:29
May I suggest investing in some motion sensitive sill mounted flame throwers. These are avaialable at a reasonable rate from the South African Army :D
On a serious note, try Clifford Alarms UK...
The accessory at the bottom of the page may be of interest!
http://www.clifford.co.uk/html/accessories.html
Steve
Steve Taylor
27-05-2002, 18:31
And the proximity sensor...
http://www.clifford.co.uk/html/accessories2.html
The promimity sensor works well, just don't park outside a pub (at kicking out time..) as it might have the opposite effect
(think about it - coming out of the pub after 10 pints and having a car telling you to BACK OFF!! is not funny)
Some people wouldn't take kindly to it and would probably kick/punch the car >=(
gringo_steve
27-05-2002, 20:16
yeah fair point! Too many stella has that effect!!
I want one that says - "Oi, you rockport wearing scally! Back off and get your own spoiler!"
gringo_steve
27-05-2002, 20:21
PS - can the standard alrm have different modules clipped to it - or will i need a new alarm?
thanks
Steve
"Oi, you rockport wearing scally! Back off and get your own spoiler!"
Nice one gringo :)
The standard 5AS alarm is not upgradeable, you'll need a new system 8)
Hey Gringo
My new ZS180 is booked in to get the follwing as the standard alarm keeps me awake at night.
Clifford 300 installed plus vat @£399
Clifford tilt sensor - to protect wheels and spoiler extra £115
I would have liked the clifford 500 but it would have been about £699 all in !!
I am getting it done by the guys at www.snoopershop.com (http://www.snoopershop.com)