Hi back again need some advise still have some piston slap for 3/4 minutes when I start my 02 reg 1.8 TF have had it checked out full job = pistons, rings, sleeves gaskets, bolts and the rest cost £1500 - £2000 cars only done 35,000 miles, question can the pistons and OK sleeve be changed with out the engine out, in which case can do it my self ? any advise welcomed

I'm not so lucky with the bulky appearance in the dash board, but nevertheless it works fine.

hello, my head gasket blew on my mg zr recently its a 52 plate so i bought a new which only had 17000 miles on out of a 55 plate i got someone to put the engine in for me and we it came bk it was running again but the engine kept revving by itself to a bout 3k revs without touching the throttle then sometimes was cuttin out at junctions etc in first gear this continued for about three days after and then it cut out completely and it felt like there was no power so i tried to fix the problem changed...

Hi, does anyone know of a diagnostic tester that would be compatible with a Mg Zs 1.6 petrol? I've searched the internet but I can't seem to find anything :-S

Hi,

A very basic question. Wife's ZR has an intermittent faulty o/side front indicator. I've checked via the hazard switch and it sometimes doesn't work. When using the indicator stalk, the side and rear bulbs wink a lot faster. Now the question... How do I remove the front indicator unit to check the connector? As soon as I went near it to prise it out, I chipped the paint.

Thanks for any help !!