ashy

hi just starting a rover 220 turbo engine into a 1998 200 vi got all the parts just need help on how to wire the 550 ecu and get the car running hope you can assist,
cheers
gary garymartin@vodafone.co.nz

how do i find your posts on fixing boot leaks/do you have any on sunroof leaks aswell!cheers!

Ashy first off happy new year.
Secondly could do with a little advice on the wiring on the turbo conversion.If your up for giving a little advice could you pm me back regards and thanks phil.
ps did a search on here but couldnt find any info.

hi pal i am 99% done with my mgzr turbo project i have one problem i cant get the injectors to work i have the 820turbo engine fitted out of a m reg with dizzy cap the loom was a nightmare to wire so i bought one of ebay of a 220 turbo i sent my ecu away to get alarm removed from world of rover put it together i have fuel spark but no injectors i am thinking its because with the 800 ecu mkc 920 mine is it has a back i thing piggyback type ecu for the engine on it but now like a idiot i did not think and on the 220 loom there is no ware to plug this i dont have a clue how to wire it in and i am stuck as i think my engine has a 4 gap ecu i think the 550 ecu wont work will it any info would be great pal i dont fancy ripping my engine back out to change fly wheels etc i could just do with finding out what ecu i could use etc cheers ashy

thanks for the guide below for the clutch adjustment!

hello m8 im new to the site and have been told your the man to speak to im looking to drop t-16 in a 200 or 25 depending on what one i can get hold of for a gud price and was wondering wot parts i will need from the coupe turbo and wot dash wud be betta you use for the clocks to work right cheerz

hi mate.
i was just in need of your advice on the thread you wrote on about what head gasket to get.. what gasket would you advise: (this all in 1 one) http://cgi.ebay.co.uk/Rover-lotus-MG...item562b5fef25 ........... (or this uprated multi steel one) http://cgi.ebay.co.uk/ROVER-75-25-UP...item20af2ba91f ..... thank you..
sam

hi mate.
i was just in need of your advice on the thread you wrote on about what head gasket to get.. what gasket would you advise: (this all in 1 one) http://cgi.ebay.co.uk/Rover-lotus-MG...item562b5fef25 ........... (or this uprated multi steel one) http://cgi.ebay.co.uk/ROVER-75-25-UP...item20af2ba91f ..... thank you..
sam

Hi bud,

was just reading your thread about your modified clutch (biting point)

http://forums.mg-rover.org/showthrea...t=clutch+pedal

i was wondering is this possible with a mg zr 1.4 04 plate? because yesterday i bought the car and i noticed the car does bite high up the clutch, and sometimes it stutters because ive raised it too much lool.

hope you can help as ive only started to delve into the MG ZR

hi mate got a turbo zr now just wondering if theres a way to reduce the amount of tourque steer when changing gears at speed? only thing i can think of appart from drive slower is to lower it.

Thanks