MG-Rover.org Forums - View Profile: technozen

technozen technozen is offline

Mmmm....Rover..

  Visitor Messages

Showing Visitor Messages 1 to 10 of 104
  1. Mark PB
    11-02-2016 14:40 - permalink
    Mark PB
    Hi,
    I bought an 2002 MGZR recently and want to make the passenger window "one-touch" down. I found your post from years ago but the link to your guide wouldn't find the document. Do you still have that? Also, do you know if there's a way to make them "one-touch" up.
    Somebody gave me another window controller, but it's a white one, not a black one, which i think is from the facelift cars. Is this usable?

    Thanks for your help.

    Mark.
  2. Streetwise TD
    16-01-2016 11:04 - permalink
    Streetwise TD
    Hello again


    The heater in my MK2 45 is still working exactly as it should, thanks again


    Now have another problem (I am starting to really dislike this car, in 15 years with the earlier 25/ZR etc I have had no electrical problems)


    The alarm has starting sounding. You unlock the car, start it, a minute or so later the alarm starts sounding, it can't be deactivated by using the panic alarm button In the car nor blipping the alarm to turn off, I seem to have to turn off the car and start again at which point it behaves. Is this a BCU fault or the sounder itself gone faulty?
  3. Junkie
    26-10-2015 20:28 - permalink
    Junkie
    Hi,

    Climate kit still available? Please PM me.

    Thanks,
    Edwin
  4. finyuk2005
    04-05-2015 21:19 - permalink
    finyuk2005
    Hi there Technozen
    I believe you are the man that can help me!
    i am repowering a boat with an 2000 year L series, and wondering if you can help me by reprogramming the 5AS so i would no longer need to rely on the fob, would that be possible?
    cheers
  5. MG-ROVER-CODES
    12-04-2015 19:11 - permalink
    MG-ROVER-CODES
    Hello stranger, how are you? This forum seems quiet...
  6. crestweed
    26-01-2015 12:24 - permalink
    crestweed
    Hi Paul
    Can you help me open the drivers door on my 02 TF?
    Both fobs work and both door buttons on the car come up, the car starts etc but the door will not budge.
    I've pulled the door card out and can see the back of the catch and sprayed a can of WD40 down there but have decided to leave it in a dry garage for a day or two to see if it pops up.
    Meanwhile I'm trawling the forums and found your website.
    Is it possible to sort this out without an air chisel?
    I'm nearby in Burgess Hill and my 160 Trophy is in Partridge Green
    I have a 98 MGF Abingdon too which has only one fob which would be great if you could sort me out a spare.
    regards Steve
  7. wolle18
    14-12-2014 19:33 - permalink
    wolle18
    check your pms mate
  8. Eegreen
    03-11-2014 14:38 - permalink
    Eegreen
    Hello Technoze,

    I have been given your details as the guy to go to for BCU problems on an MG TF.

    Saturday my OS window decided it didnt want to go up. We checked the cables and the fuse with no luck. I have now taken it to a garage who have checked it over and used a battery to wind the window up into place. They have also said that this is the BCU.

    I have noticed previously that the intemediary wipers do not work either and upon further research can now put this down to a faulty relay on the BCU.

    If i purchase replacements is this something that I can do myself and replace the relays? Any advice you could give would be great.

    Kind Regards

    Emma
  9. Mindy
    24-10-2014 00:28 - permalink
    Mindy
    Hi there, how you doing. I question for you. I have an LE500 and I also have two spare oval fobs that have the boot button as well as lock/unlock. Is it possible to have these fobs 'linked' to my car. I have the bar code too. I'm travelling to Sandhurst next week so not to far from you. You are in Brighton? and wondered if possible could you sort this for me. Obviously with payment. Thanks Mindy.
  10. nickdavies95
    14-10-2014 10:42 - permalink
    nickdavies95
    I need the immobilizer wiring diagram. Also if I supplied an ecu with a 5as and fob could you allign them for a price ? Cheers

  About Me

  • About technozen
    Where did you hear of this site?
    Rover200.com
    What make of car do you drive?
    Mk2 ZS 160, 200vi(RIP) & Freelander XEDi
    Your Country
    United Kingdom
    Location
    Brighton.
    Occupation
    Electronics engineer
  • Signature
    Free Fob Programming and Diagnostics for forum Supporters... see here.

    Pektron SCU/BCU Technical Information and Common Faults... see here.

    Discounted Pektron SCU/BCU Relay Replacement for forum Supporters... see here.

  Statistics

Total Posts
Visitor Messages
Blog
General Information
  • Last Activity: 11-01-2017 00:38
  • Join Date: 05-03-2002
  • Referrals: 13

  Friends

Showing Friends 1 to 10 of 40

  Mentions

No results to display...

  Quotes

22-12-2016
08:56 - JOHNDQ quoted technozen in post Pektron SCU/BCU
You should have the two-tone c...
08:35 - JOHNDQ quoted technozen in post Pektron SCU/BCU
Sounds like the central lockin...
00:34 - JOHNDQ quoted technozen in post Pektron SCU/BCU
I also found this excellent th...
30-11-2016
04:53 - flydoc quoted technozen in post speedo still not working!!
The fault can only be caused b...
27-11-2016
18:52 - JOHNDQ quoted technozen in post Which wire disables deadlock?
Yes, one of the most irritatin...
01:09 - JOHNDQ quoted technozen in post Which wire disables deadlock?
Yep, Brown/Pink is the feed to...
16-11-2016
10:24 - Man in the Car quoted technozen in post Speedo failed - R25 1.4
...ther recent post by technozen in another thread: ...
11-11-2016
09:45 - JT Dent quoted technozen in post A slightly different Pektron fault thread.
Can you check that the SCU is ...
30-10-2016
20:34 - BunnyGee quoted technozen in post Key fob not working
I would expect that resolderin...
29-10-2016
18:02 - BunnyGee quoted technozen in post Key fob not working
If the buttons no longer work ...
19-10-2016
21:09 - Man in the Car quoted technozen in post Stereo, Boot Lock and Immobilizer Light not working
Get into the boot via the rear...
06-10-2016
08:51 - ChertoZmey quoted technozen in post New SCU Pektron
I doubt that the fault you hav...
31-08-2016
20:33 - technozen quoted ajmetro1 in post Matallic noise from head reduces once warm
Not sure exactly where you me...
18:26 - ajmetro1 quoted technozen in post Matallic noise from head reduces once warm
The cambelt end VVC mechanism ...
27-08-2016
21:37 - JOHNDQ quoted technozen in post Scu/ Bcu relays
Rich, I have replied to your e...
20:58 - warden quoted technozen in post Scu/ Bcu relays
When it fails there will be no...
09-08-2016
10:19 - Incony quoted technozen in post PWM control of blower motor
I have some Valeo spec notes f...
08-08-2016
21:06 - michaelb quoted technozen in post Horn sounding randomly
Dropping battery voltage is no...
28-07-2016
20:41 - ajmetro1 quoted technozen in post Matallic noise from head reduces once warm
It looks as oily as I would ex...
19-06-2016
13:41 - Dorchester quoted technozen in post VIN & HG: which one?
...G512.png Thank you technozen, you're a star!
 
For the best viewing experience please update your browser to Google Chrome