Forums - View Profile: technozen

technozen technozen is offline


  Visitor Messages

Showing Visitor Messages 51 to 60 of 104
  1. brianereed
    24-05-2011 10:57 - permalink
    hi can you supply me with one of those low fuel warning light kits with instructions for my rover streetwise e-mail with the payment method you require thanks brian .
  2. lsaundry
    22-05-2011 17:40 - permalink
    Hi technozen just replying with my email addy as I requested a fuel pump wiring diagram for rover streetwise. Wud be much appreciated. Email addy is
  3. Rosses85
    12-05-2011 16:04 - permalink
    I have a Key Fob which requires programming. I lost one of my original set of keys and had to buy another. Can you help. Please let me know the cost and what I am to send to you.
    I am a longtime MG enthusiast having completely restored in the last 35 years, 2 Midgets and an MGA but when things electronic give me trouble I am completely at a loss.
    Hope you can help. My telephone No. is 02825641756 if you would prefer to call me.
  4. jtl123
    20-04-2011 10:37 - permalink

    Can you please supply me with 4 of the Fujitsu replacement relays for the Pektron SCU.

    This is for a mg tf 135 I have had the scu to bits and it look exactly the same. The car will unlock from the fob but not lock, if you lock with the key then press lock on the fob it enters super lock so it sound like the relay on the far right, also super lock did not disable the door pins so I am guessing this is the relay next to the central door locking one.

    Absolutely brilliant post cannot thank you enough, this has been driving me crazy I have stripped the door locks and boot looks etc, throught it might be this unit and enter the relay number on the web and this little gem of a post appear.

    Thanks Again
  5. traineecollins
    09-04-2011 20:24 - permalink
    Thanks again for today!

  6. stevedx
    07-04-2011 15:09 - permalink
    Hi Dude

    How are you, hope you are well, been a while eh!

  7. Peterover
    25-02-2011 01:06 - permalink
    Thanks you for all your help.. luckily turned out to be a loose connection.. though only found on 3rd or 4th check..

    Advice though was sound.. and saved me some sleepless nights.
    So many sincere thanks.
  8. Chambers2000
    24-02-2011 16:32 - permalink
    Thank you for your advise with my central locking. 15amp in the engine box changed and all working. (Must stop jumping around pressing key fob!)
  9. 20vturbo
    23-02-2011 15:55 - permalink
    hi. it seems u are the expert on here. my car will not start! have filled up with petrol 35pounds - checked spark plugs an they are sparking,used easy start. the car just turns over but will not fire. it has started twice an then died after 4seconds and since then does not start. has a new battery
  10. samrovercoupe
    03-02-2011 20:17 - permalink
    hi noticed u r in brighton can u help with key fob with rover coupe 1.8 07597640026

  About Me

  • About technozen
    Where did you hear of this site?
    What make of car do you drive?
    Mk2 ZS 160, 200vi(RIP) & Freelander XEDi
    Your Country
    United Kingdom
    Electronics engineer
  • Signature
    Free Fob Programming and Diagnostics for forum Supporters... see here.

    Pektron SCU/BCU Technical Information and Common Faults... see here.

    Discounted Pektron SCU/BCU Relay Replacement for forum Supporters... see here.


Total Posts
Visitor Messages
General Information
  • Last Activity: 24-06-2017 19:06
  • Join Date: 05-03-2002
  • Referrals: 13


Showing Friends 1 to 10 of 40


No results to display...


12:41 - Dorchester quoted technozen in post VIN & HG: which one?
...G512.png Thank you technozen, you're a star!
08:58 - Dorchester quoted technozen in post Deleted Posts
21:13 - Stargatemunky quoted technozen in post Mems3 Swap
Despite having repaired a few ...
21:23 - steviejones133 quoted technozen in post Recommend me a clutch kit......
If mine was losing that much c...
21:34 - technozen quoted Robert Vons in post Mg zr completely dead - help!
The fob has, if I recall well, 6...
18:44 - Diesel011 quoted technozen in post VVC conversion not starting
Glad it's up and running. W...
14:06 - SimonDH quoted technozen in post 214 won't start - ECU?
The ECU would be the last item...
For the best viewing experience please update your browser to Google Chrome