MG-Rover.org Forums banner

mgf 18 vvc head strip + build

1K views 7 replies 6 participants last post by  dert 
#1 ·
Can anyone please point me in the direction of a walk through . for striping and rebuilding my vvc head.
I need to get it skimed,
So was thinking good opertunity to reseat the valves ,new stem seals , cam seals etc. what do i use to re seal the cam carrier to the head. and any improvements you can sugest.
im considering removing the burs in the waterways,is this a good idea to help the flow.
Thanks to those with more knoledge than me , first time ive done a VVC,
Had experience on x flow, pinto, cvh, .
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top