MG-Rover.org Forums banner

Tow bar wiring...Anyone got a wiring diagram?

5K views 5 replies 2 participants last post by  cju 
#1 ·
Hi everyone,

I'm new here and ive got a Rover 220 SDI 98 model. I've recently fitted a Towtrust tow bar and am having difficulty wiring the single electrics up due to not having a wiring diagram. If anyone could email me a copy it would be great. mi16pug@tiscali.co.uk

Or if anyone knows which wires are which,then that would be great too.

Thanks in advance

Jon.
 
#2 ·
Green+pink striped = Brake
Red+Orange striped = Rear illumination
Blue+yellow striped = fog
Green+White striped = RH IND
Green+Red striped = LH IND

All of the above are earthed to complete the circuits

Test connections with multimeter first!

Hope this helps

Thanks
 
#4 ·
Thanks for that, thats a big help.

I'm an electrical numpty,if i get a multi meter on the connections,where can i earth the other probe? I tried earlier but didnt get a reading on any connections?
Positive needs to go on the wire your testing and the negative needs to go on the cars body or an earth point. When the wire is powered the light will light on the car and the mulimetre should show a reading.

Thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top