New alloys for me it seams - MG-Rover.org Forums

Jay160 · 20-06-2012, 09:28

insurance been on the phone seams my black inovate redlines are discontinued

so hopefully i may get a choice of new alloys

id like a set of black 11 spoke like on the TF

any ideas who might do a set

cheers

robdrinkwater · 20-06-2012, 12:12

Quote:

Originally Posted by Jay160

insurance been on the phone seams my black inovate redlines are discontinued

so hopefully i may get a choice of new alloys

id like a set of black 11 spoke like on the TF

any ideas who might do a set

cheers

If you're after TF advice & bits it's probably best to post this in the F/TF section TBH.

I won't move it yet just in case you do mean you want 75 bits.

Regards, Rob.

Shuntis · 20-06-2012, 12:20

He does mean for his ZT I believe as a result of this:

http://forums.mg-rover.org/showthread.php?t=472998

I can only suggest getting a set of MK2 11 spoke 18's and get them powder coated but I don't know any particular make that would be similar.

Jay160 · 20-06-2012, 12:33

yes sorry for the zt

ive seen 11 spokes on some zt(2.5s?) and they look the same as the 11 spokes on a tf

not sure wether thell let me buy a 2nd hand set and get them done

may have to look around for something similar

Shuntis · 20-06-2012, 12:41

Depends how much they'll give you, I think you can still get the 11 spokes new.

http://www.mgroveraccessories.com/sh...%29/index.html

Jay160 · 20-06-2012, 13:07

ah thats them

ive been told between 400 to 500 maybe .. not enough to get them and have them done black maybe

TouchStone · 20-06-2012, 13:15

do ZT have 4 bolts holding wheel on then? the same as my TF, thought they had five like my 75.
You learn something new every day.

Jay160 · 20-06-2012, 13:23

5 stud 7.5J ...think the picture is from something else zs ?

ive got the 11 spokes on my tf

dave_lee · 21-06-2012, 09:34

Quote:

Originally Posted by Jay160

ah thats them

ive been told between 400 to 500 maybe .. not enough to get them and have them done black maybe

hey mate just seen your in notts, i had my wheels powder coated by rob at total wheels in colwick (little tennis street) last year for a very good price, so wont be too much over budget

Jay160 · 21-06-2012, 19:59

ahhhh im right p$%^&^ off

insurance have said they carnt get the wheel anymore

they will pay me 94 quid for the knackered alloy and ive got to put a different one on that doesnt match the other 3 my self

a clause in my policy apparently.. even its quite aparrant that it wasnt my fault

http://forums.mg-rover.org/showthrea...57#post5065457

20-06-2012, 09:28	#1
Jay160 Registered User Join Date: May 2010 Location: Nottingham Car: MGZT160 54 RioRed "Lucifer" Posts: 586	New alloys for me it seams insurance been on the phone seams my black inovate redlines are discontinued so hopefully i may get a choice of new alloys id like a set of black 11 spoke like on the TF any ideas who might do a set cheers

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rover 75 2.0 cdti problem - it seams that mechanics could not solve it	radonmen	MG ZT / Rover 75 (Sponsored by Rimmer Bros)	10	13-02-2008 14:49
Steering wheel rim seams	doublekite	MG ZT / Rover 75 (Sponsored by Rimmer Bros)	1	01-07-2007 20:14
Seams Check Yours!!	capese21	MGF and MGTF (Sponsored by MGF Mania)	11	03-04-2003 12:11
Seams Picture	capese21	MGF and MGTF (Sponsored by MGF Mania)	1	15-03-2003 20:25
Windscreen seams	capese21	MGF and MGTF (Sponsored by MGF Mania)	1	02-03-2003 18:29

20-06-2012, 12:20	#3
Shuntis God of Small Pies Join Date: Feb 2004 Location: Norfolk, UK Car: 53 MG ZT-T CDTi Posts: 5,249	He does mean for his ZT I believe as a result of this: http://forums.mg-rover.org/showthread.php?t=472998 I can only suggest getting a set of MK2 11 spoke 18's and get them powder coated but I don't know any particular make that would be similar.

20-06-2012, 12:33	#4
Jay160 Registered User Join Date: May 2010 Location: Nottingham Car: MGZT160 54 RioRed "Lucifer" Posts: 586	yes sorry for the zt ive seen 11 spokes on some zt(2.5s?) and they look the same as the 11 spokes on a tf not sure wether thell let me buy a 2nd hand set and get them done may have to look around for something similar

20-06-2012, 12:41	#5
Shuntis God of Small Pies Join Date: Feb 2004 Location: Norfolk, UK Car: 53 MG ZT-T CDTi Posts: 5,249	Depends how much they'll give you, I think you can still get the 11 spokes new. http://www.mgroveraccessories.com/sh...%29/index.html

20-06-2012, 13:07	#6
Jay160 Registered User Join Date: May 2010 Location: Nottingham Car: MGZT160 54 RioRed "Lucifer" Posts: 586	ah thats them ive been told between 400 to 500 maybe .. not enough to get them and have them done black maybe

20-06-2012, 13:23	#8
Jay160 Registered User Join Date: May 2010 Location: Nottingham Car: MGZT160 54 RioRed "Lucifer" Posts: 586	5 stud 7.5J ...think the picture is from something else zs ? ive got the 11 spokes on my tf

21-06-2012, 19:59	#10
Jay160 Registered User Join Date: May 2010 Location: Nottingham Car: MGZT160 54 RioRed "Lucifer" Posts: 586	ahhhh im right p$%^&^ off insurance have said they carnt get the wheel anymore they will pay me 94 quid for the knackered alloy and ive got to put a different one on that doesnt match the other 3 my self a clause in my policy apparently.. even its quite aparrant that it wasnt my fault http://forums.mg-rover.org/showthrea...57#post5065457

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)