Finally Picked up my TF - MG-Rover.org Forums

gringolian · 12-02-2007, 06:57

I posted on here a while ago saying I'd bought a TF160 in x-power grey, and it's been about 2 weeks but after a few cock ups at the bank, I've finally picked it up! I'll get some pics later and post them, but for now I wanted to ask about the passenger door; when the window is up, it gets caught really tightly under the hoods seal and you have to really tug it to pop it out. I didn't notice this when we picked the car up, and I've raised and lowered the hood a couple of times to see if that was mis aligned. The drivers door seals under the hood OK and isn't too tight but I wondered if this was normal or is there a way to correct it?

Loaky · 12-02-2007, 07:03

Congratulations!

Shouldn't be that tight, i'm sure the seals can be adjusted a little. Mine have never sat 100% right but they don't cause me problems and don't leak so i've left them.

Lee121 · 12-02-2007, 07:16

congrats.....welcome to the community.....best colour too

12-02-2007, 06:57	#1
gringolian Registered User Join Date: Jan 2007 Location: Aylesbury Car: MG TF160 Posts: 136	Finally Picked up my TF I posted on here a while ago saying I'd bought a TF160 in x-power grey, and it's been about 2 weeks but after a few cock ups at the bank, I've finally picked it up! I'll get some pics later and post them, but for now I wanted to ask about the passenger door; when the window is up, it gets caught really tightly under the hoods seal and you have to really tug it to pop it out. I didn't notice this when we picked the car up, and I've raised and lowered the hood a couple of times to see if that was mis aligned. The drivers door seals under the hood OK and isn't too tight but I wondered if this was normal or is there a way to correct it?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Finally picked up my first MGF today yey! Couple of questions!	LisaR	MGF and MGTF (Sponsored by MGF Mania)	9	05-08-2006 21:10
Picked up my TF TODAY!!!	mgroverboy	MGF and MGTF (Sponsored by MGF Mania)	12	13-04-2006 06:07
Finally picked it up!	Lisa1981	MGF and MGTF (Sponsored by MGF Mania)	43	15-03-2006 21:19
I picked up my new TF on Friday...	Lyesie	MGF and MGTF (Sponsored by MGF Mania)	28	16-01-2006 18:24

12-02-2007, 07:03	#2
Loaky Modding for dummies.. Join Date: Nov 2004 Location: Northamptonshire Car: MG TF 135 in XPG Posts: 14,744	Congratulations! Shouldn't be that tight, i'm sure the seals can be adjusted a little. Mine have never sat 100% right but they don't cause me problems and don't leak so i've left them.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)