MK3 Rover 200 Indiglo Dials Group Buy!!!! - MG-Rover.org Forums
 
 
 Sponsored Insurance Links: Car Insurance  |  Van  |  Home  |  Bike  |  Travel  |  Breakdown  |  Convicted Driver Insurance
 
Go Back   MG-Rover.org Forums > Ask The Gurus! - Help and Advice Forums > MG/R Modification & Tuning

Reply
 
Thread Tools Rate Thread Display Modes
Old 02-11-2004, 18:19   #1
gary_yuen
Registered User
 

Join Date: Aug 2004
Location: Glasgow
Car: Other Manufacturer
Posts: 42
Send a message via MSN to gary_yuen
MK3 Rover 200 Bubble Shape Indiglo Dials Group Buy!!!!

Hi all,

I have just got the permission from the admin to post up on the forum for some INDIGLO DIALS!!! Many thanx to the admin I am offering an opportunity of group buy of dials at discounted rate for the MK3 Rover 200 both 130 mph and 150 mph speedo so from 214 to the 218 Vi are all covered. (Not sure on the disel model - if any one can help out there would be great. Here is some details and what would happen at each stage of the group buy.

Please also check back frequently, so that you are up to date with the group buy. At the bottom of this post, I will keep it updated regarding the group buy for quick reference.

The 1st post (this one) will be updated if there are any change to the conditions and updates.

Kit includes: -

1 x set of Dials faces Rev Counter, Fuel, Temp, Speedo (both 130 and 150 mph)
1x Transformer (which have the brightness and colour adjustment feature built in and included)

Fitting Instruction - Will be a link post up here when ready.

DO NOT require removal of needles when fitting these dials!!!

Lead Time: -

6-8 weeks after production started at most. (although we are starting manufacturing them in 1.5 weeks time)


Price: -

£55 per set inc PnP (based on minimum of 20 sets)

Template: -



Style: -
Full lite indiglo. Colour Fade from Blue to Green . Colour and Brightness both adjustable.

This is the other Rovers that I have produced which will give you an idea what they will be looks like when completed : -





It is very hard to get a good picture of the dials, but they goes more blue then it is shown on the picture and you can also dim it down as you wish!!!



Ordering: -

Please download this Form and fill it in, then send it back to us: -

MY Garage
4 Birnam Place,
Newton Mearns,
Glasgow
G77 5UE

Along with a cheque of £55.00, please made payable to "MY Garage"

I will put up a list of names who have sent in their form with payment here in this 1st Post.

Paid:-
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)


Note: we prefer cheque payment, we only cash in once we are ready to roll. The reson is it is easier to keep track of whos paid and who hasn't.

Warranty/Defects

- If any dials found to be defects, they will be replaced (if stock allowed) within the first 3 months of purchase and usually we order in more then just the total group buy amount for this purpose.

- It excludes any improper fitment and ill treatment of the dials. We will post the fitting instruction on here when dials are developed.

FAQ
1) Are there any bulbs involved to light it up?
A: No bulbs involved in lighting up the dials. The dials is ilumination by a sheet of material that we use. As bulb may not able to archieve even colour distribution across the whole face of the dials. However we recommend removing some of the ilumination bulbs at the back of dashboard when installing to aviod the organge light shining on the dials which causes colour variance.


2) What delivery service will be used?
A: We will post out the dials via Royal Mail First Class Recorded service.


3) Do I need to remove the needle to fit the dials?
A: No, our dials are designed so that you just sliding the indiglo dials over the OEM dials faces since removing the needle and re-install may cause variance in read out.


4) What colour are the dials when they are not lite up?
A: They are normal white dials when not lite.


Staus Of Group Buy: -

OEM Dash: Recieved.
Template Development: COMPLETED!!!
Payment Collection: In progress
Production: Not Started
Depatch: Not Yet

Last edited by gary_yuen; 02-11-2004 at 23:32. Reason: Additional Information added
gary_yuen is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 02-11-2004, 23:15   #2
deaney
Registered User
 

Join Date: Mar 2004
Location: Coventry
Car: Rover 200 Coupe
Posts: 2,165
Oh right so your on here and not just ebay.. lol just emailed you about a set for the R200/MK3....

£55 is nice and cheap... so they only that cheap if you get 20? like a piramid scheme kinda thing?
deaney is offline   Reply With Quote
Old 03-11-2004, 00:28   #3
gary_yuen
Registered User
 

Join Date: Aug 2004
Location: Glasgow
Car: Other Manufacturer
Posts: 42
Send a message via MSN to gary_yuen
Yes I have listing of Rover dials on Ebay for £64.99. Not sure what you meant by pirmaid scheme thought.

Ideally we would need around 20 interests so that we can offer a discount price on the dials. However if it was close to 20 we may also able to accept as well. We have also done this on www.sxoc.co.uk which is a Nissan 200 sx forum.
gary_yuen is offline   Reply With Quote
Old 03-11-2004, 17:51   #4
sjc59
Registered User
 

Join Date: Mar 2003
Location: Kent
Car: Rover 400 (95-99)
Posts: 892
Send a message via MSN to sjc59
Hi mate would you be able to do a one off set for a bubble 400 as knowone ever does anything for them? If so at what cost?
sjc59 is offline   Reply With Quote
Old 03-11-2004, 20:29   #5
gary_yuen
Registered User
 

Join Date: Aug 2004
Location: Glasgow
Car: Other Manufacturer
Posts: 42
Send a message via MSN to gary_yuen
Yes it could be possible to do a one off. However I will need to get the OEM dash from you to make the dials. Also the cost is very high for 1 off because of the tooling charge. I reckon £100+ for one offs.

gary_yuen is offline   Reply With Quote
Old 03-11-2004, 20:39   #6
sjc59
Registered User
 

Join Date: Mar 2003
Location: Kent
Car: Rover 400 (95-99)
Posts: 892
Send a message via MSN to sjc59
Would you need the whole set of clocks or just the dials themselves? have been looking at some other coloured custom ones and they bout 90quid so depending on how much more than 100quid i might be interested, also if you made them they would also fit the 45's and zs' as far as i'm aware.
sjc59 is offline   Reply With Quote
Old 03-11-2004, 22:03   #7
gary_yuen
Registered User
 

Join Date: Aug 2004
Location: Glasgow
Car: Other Manufacturer
Posts: 42
Send a message via MSN to gary_yuen
I will need the instrument cluster complete. Therefore the rev counter, Speedo fuel + temp with the backing all together.
gary_yuen is offline   Reply With Quote
Old 03-11-2004, 22:56   #8
dj_rs
Registered User
 

Join Date: Nov 2003
Location: Birmingham
Car: Rover 200 (95-99) "Bubble Shape"
Posts: 953
im very interested but how about if i pay then you only get like 5 orders? do i get my money back?
dj_rs is offline   Reply With Quote
Old 04-11-2004, 00:21   #9
rover 620ti
Registered User
 

Join Date: Oct 2003
Location: West Sussex
Car: Rover 75
Posts: 669
Send a message via AIM to rover 620ti
how much is it for the mk II 200?
rover 620ti is offline   Reply With Quote
Old 04-11-2004, 00:51   #10
gary_yuen
Registered User
 

Join Date: Aug 2004
Location: Glasgow
Car: Other Manufacturer
Posts: 42
Send a message via MSN to gary_yuen
DJ_RS if you are registering your interest for the group buy. What we require is you sending in the group buy form + your cheque as payment. Now the cheque won't be cashed in until the group buy is ready to roll. Regarding the case where there isn't sufficent number, I have a bit of leaverage on the number however we are aiming for 20. If in the case that the number is really low then you cheque won't be cashed in and will be destroyed, so the cash have never left your account.

Member Prices: -

Pre 95 200 150 MPH speedo only £60 inc PnP
MG-ZR + Rover 25 with 130 mph Speedo 150 Speedov £60 inc PnP

If you have any questions about dials other then the Rover Mk3 200 please PM me in person I will get back to you asap. Thanx
gary_yuen is offline   Reply With Quote
Old 04-11-2004, 20:52   #11
deaney
Registered User
 

Join Date: Mar 2004
Location: Coventry
Car: Rover 200 Coupe
Posts: 2,165
I think maybe people are abit nervious to send the cheque/s dosh at the minute....

i think you should ask how many people are intrested without sending any form of money... then they will all bundle together and send some dosh.. IM DEFO INTRESTED.

But i wont send any money until 19 others say YES.

So i think you should make a list of how many people are intrested. I DEFO AM!
deaney is offline   Reply With Quote
Old 04-11-2004, 21:19   #12
gary_yuen
Registered User
 

Join Date: Aug 2004
Location: Glasgow
Car: Other Manufacturer
Posts: 42
Send a message via MSN to gary_yuen
I know and understand where you are coming from. However from our experience we had with group buy, we had a list of names but comes to collecting cheque it takes a long time + some will be just spamming the list.


To back your confidence, You can read our feedback we had on Ebay: -
http://cgi.ebay.co.uk/ws/eBayISAPI.d...e=STRK:MESE:IT


, as well as onSXOC 200 SX forum where we have previously and currently dealing with their dials groupbuy. :-


http://www.sxoc.co.uk/vbb/showthread...ials+group+buy


http://www.sxoc.co.uk/vbb/showthread.php?t=111197



And also our website: www.mygarage-glasgow.co.uk

Last edited by gary_yuen; 04-11-2004 at 21:39. Reason: Links added
gary_yuen is offline   Reply With Quote
Old 04-11-2004, 21:55   #13
ramseyrover
Registered User
 

Join Date: Nov 2004
Car: Rover 200 (95-99) "Bubble Shape"
Posts: 31
Thumbs up hey guys this is ligit

hey guys this guy is ligitamate he did the same thing before on another site and kepk his word and any way if not enought of u are interested and some people send their cheques you can always cancell the chequ with out a problem i trusted this guy before and ill do it again im in m8 ill send u my details and chequ tomorow looking 4ward to b the 1st in recieveing the dials guys help this guy out im gna advertise his site on my car www.mygarage-glasgow.co.uk not alot on there but im sure hes trying if i was in his place i wld want support!!! go 4 it dudes these dials look the ********
ramseyrover is offline   Reply With Quote
Old 04-11-2004, 21:55   #14
dj_rs
Registered User
 

Join Date: Nov 2003
Location: Birmingham
Car: Rover 200 (95-99) "Bubble Shape"
Posts: 953
im definately interested just need to know how long they take to produce.
dj_rs is offline   Reply With Quote
Old 04-11-2004, 21:59   #15
gary_yuen
Registered User
 

Join Date: Aug 2004
Location: Glasgow
Car: Other Manufacturer
Posts: 42
Send a message via MSN to gary_yuen
To Produce the dials it takes around 6 weeks. If we have 10 interests on the list I will start manufacturing them to save time.
gary_yuen is offline   Reply With Quote
Old 05-11-2004, 08:37   #16
alt
Registered User
 

Join Date: May 2004
Location: Galway, Ireland
Car: Rover 200 (95-99) "Bubble Shape"
Posts: 1,708
Send a message via MSN to alt
I am *definately* interested. And I can guarantee I WILL buy a set from you, but im not going to send a cheque to you before you even start production. If/when they are produced and I can see a final picture of the mk3 200 ones, i will lhave no problem giving you £55 for them
alt is offline   Reply With Quote
Old 05-11-2004, 10:34   #17
deaney
Registered User
 

Join Date: Mar 2004
Location: Coventry
Car: Rover 200 Coupe
Posts: 2,165
Ill defo go for some also.. but once everyone gets there ****'s in gear and sends you there cheques ill send mine... its not that i dont trust you, and your right i can cancel the cheque but i cant be fecked being no#2 on the list and then waiting ages and ages and ages for like 18/8 more people to join up.

SO FAR:

1. DJ_RS
2. ME (deaney)
3. alt
4.GoldRover *UPDATED 06/11/04*

Last edited by deaney; 06-11-2004 at 13:09.
deaney is offline   Reply With Quote
Old 05-11-2004, 11:16   #18
alt
Registered User
 

Join Date: May 2004
Location: Galway, Ireland
Car: Rover 200 (95-99) "Bubble Shape"
Posts: 1,708
Send a message via MSN to alt
Maybe we can get this guy to update his list in the first post... I think the more names that are on the list, the more people will be encouraged
alt is offline   Reply With Quote
Old 05-11-2004, 11:20   #19
dj_rs
Registered User
 

Join Date: Nov 2003
Location: Birmingham
Car: Rover 200 (95-99) "Bubble Shape"
Posts: 953
So that means they will be produced towards the end of december?

Come on people lets be part of the elit "indigo dials crew!"
dj_rs is offline   Reply With Quote
Old 05-11-2004, 12:57   #20
goldrover
Registered User
 

Join Date: Dec 2003
Location: shrewsbury
Car: Classic Rover
Posts: 140
im def interested !! will do me until the digi dash is completed
goldrover is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Final Attempt - Group Buy Rover 200 Dials slyboogie MG ZR / Rover 25, 200 & Streetwise 53 02-12-2007 01:01
Group Buy Rover 200 (R3) White dials and heater dials cr4igp4lmer MG ZR / Rover 25, 200 & Streetwise 0 19-11-2006 07:23
Indiglo dials group buy dazultra2000 MG ZS / Rover 45 & 400 3 18-08-2006 20:39
Will you buy mk3 200 Indiglo dials? alt MG/R Modification & Tuning 61 21-10-2005 11:12
Indiglo dials mk3 200 kamikazi929 MG/R Modification & Tuning 19 09-06-2005 15:09


All times are GMT. The time now is 19:01.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
ShowCase, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.