Breaking Ti - MG-Rover.org Forums

rnash2002 · 24-06-2005, 20:29

Well change of plan so im gona break the ti,most of the mods i want to keep to put on my next rover but the rest i will sell,just a quick list
Longlife Stainless Exhaust From Cat Back With Ovel Tail Pipe

engine gear box is nice and tight+ just had a new clutch about 1000 miles ago.

Ti 16"s with nearly new p6000 rubber on(alloys in pritty good condition)

leather interiar in very good conditaion no rips or scuffs

leather arm rest

standard intercooler
rad
Im open to offers on everything but i do have a rought price in mind for the stuff.

engine will come without turbo as i want to keep that.
Spec
1995 620Ti Grey

Engine
Longlife Stainless Exhaust From Cat Back With Ovel Tail Pipe
Bailey Single Piston Dump Valve
Bmc Cda Air Filter
Gbe™ Evo Boost Controller @13.5Psi
T28 Off Nissan Pulsar Gtir
Twin Air Horns

Gtir Intercooler
Blue Piper Breather Filter

Interior
Standard Ti Interior But Wood Trim On Door Cards Sprayed Gunmetal
Mocal Boost Gauge In Single Pod On Stearing Coloum
Battery In Boot
Dark Smoked Windows
Leather Arm Rest

Exterior
16" Standard Ti Alloys
Sca Racing Sticker On Back Window
Rovertech Sticker On Bottem Of Back Window
Gb-ent.co.uk On Boot Lid
Clear Side Repeaters
Colour Coded Back Number Plate Surround
Meshed Grill Colour Coded
Meshed Front Bumper
Square Number Plate
Bonnet Pins

Suspension
lowering Springs

Brakes
Standard

Ice
Kenwood Cd Head Unit
1400 Watts 4 Channel Amp
600 Watts Ground Zero Sub In Ported Box
300 Watt Jbl's 6"9's

Pm me or email me at rnash2002@hotmail.com

rnash2002 · 29-06-2005, 21:57

bttt.............................................. .

lates · 29-06-2005, 22:31

Evening mate,
Could you give me a price of the front centre half of the console ( around radio etc ) and lower dash cover ( below collumn ) if all the retaining clips are still ok, mine are a little flaky after being removed and refitted over the years.

lates · 05-07-2005, 16:41

Also need the centre boot badge if its not battered on removal.

lamboR25 · 16-07-2005, 16:04

Hello mate,
interested in the alloys, how much would you be after for them?
cheers

Matt · 16-07-2005, 16:10

Dude, got any updated pics of your car? Take it was yours having all the work done?

Vitesse16v · 10-09-2005, 10:52

Will you sell the GBE seperate?

keefybaby82 · 13-11-2009, 18:05

How much for the lowering springs? what make and how much lower are they than standard?

BIGGUNS · 13-11-2009, 18:12

Quote:

Originally Posted by keefybaby82

How much for the lowering springs? what make and how much lower are they than standard?

have a look at the original date of post, I have made the same mistake..................... unless you think he still might have them!

SIMPLY SI · 13-11-2009, 22:07

just to let you all know.......................Last Activity: 30-12-2008 11:45

Daf200 · 14-11-2009, 01:55

Hello mate,
How much for the bmc cda posted?

SIMPLY SI · 14-11-2009, 07:25

Quote:

Originally Posted by Daf200

Hello mate,
How much for the bmc cda posted?

dude read the post above yours......................he aint been on for donkies!!!!

rnash2002 · 26-11-2009, 14:04

LMAO!!! this is well and truly been scrapped,probably over in china in a building hehe.

24-06-2005, 20:29	#1
rnash2002 Registered User Join Date: Jul 2004 Location: Norwich Car: 220 gsi turbo Posts: 155	Breaking Ti Well change of plan so im gona break the ti,most of the mods i want to keep to put on my next rover but the rest i will sell,just a quick list Longlife Stainless Exhaust From Cat Back With Ovel Tail Pipe engine gear box is nice and tight+ just had a new clutch about 1000 miles ago. Ti 16"s with nearly new p6000 rubber on(alloys in pritty good condition) leather interiar in very good conditaion no rips or scuffs leather arm rest standard intercooler rad Im open to offers on everything but i do have a rought price in mind for the stuff. engine will come without turbo as i want to keep that. Spec 1995 620Ti Grey Engine Longlife Stainless Exhaust From Cat Back With Ovel Tail Pipe Bailey Single Piston Dump Valve Bmc Cda Air Filter Gbe™ Evo Boost Controller @13.5Psi T28 Off Nissan Pulsar Gtir Twin Air Horns Gtir Intercooler Blue Piper Breather Filter Interior Standard Ti Interior But Wood Trim On Door Cards Sprayed Gunmetal Mocal Boost Gauge In Single Pod On Stearing Coloum Battery In Boot Dark Smoked Windows Leather Arm Rest Exterior 16" Standard Ti Alloys Sca Racing Sticker On Back Window Rovertech Sticker On Bottem Of Back Window Gb-ent.co.uk On Boot Lid Clear Side Repeaters Colour Coded Back Number Plate Surround Meshed Grill Colour Coded Meshed Front Bumper Square Number Plate Bonnet Pins Suspension lowering Springs Brakes Standard Ice Kenwood Cd Head Unit 1400 Watts 4 Channel Amp 600 Watts Ground Zero Sub In Ported Box 300 Watt Jbl's 6"9's Pm me or email me at rnash2002@hotmail.com

29-06-2005, 22:31	#3
lates www.lates600.com Join Date: Dec 2002 Location: Warwickshire , Coventry Car: 190 in Firefrost Posts: 5,664	Evening mate, Could you give me a price of the front centre half of the console ( around radio etc ) and lower dash cover ( below collumn ) if all the retaining clips are still ok, mine are a little flaky after being removed and refitted over the years. __________________ Regards, Lates600 End October now gents.

05-07-2005, 16:41	#4
lates www.lates600.com Join Date: Dec 2002 Location: Warwickshire , Coventry Car: 190 in Firefrost Posts: 5,664	Also need the centre boot badge if its not battered on removal. __________________ Regards, Lates600 End October now gents.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Breaking Ti spares.	mickh	Rover 600	9	07-02-2008 11:37
Rover 620 ti exhaust and dumpvalve breaking 620 ti	pinny2005	Rover 600	8	05-10-2007 21:18
BREAKING 1996 Ti	RED-ROVER-Ti	For Sale	96	13-03-2007 19:33
M plate Ti Breaking	Marko	For Sale	0	10-02-2004 22:27

29-06-2005, 21:57	#2
rnash2002 Registered User Join Date: Jul 2004 Location: Norwich Car: 220 gsi turbo Posts: 155	bttt.............................................. .

16-07-2005, 16:04	#5
lamboR25 Registered User Join Date: Feb 2005 Car: Rover 25 Posts: 22	Hello mate, interested in the alloys, how much would you be after for them? cheers

16-07-2005, 16:10	#6
Matt Registered User Join Date: Aug 2003 Location: Staffordshire. Car: 2003 Trophy Blue MG ZR 105+ with Lenso's. Posts: 7,985	Dude, got any updated pics of your car? Take it was yours having all the work done?

10-09-2005, 10:52	#7
Vitesse16v Registered User Join Date: Aug 2005 Car: Rover 800 Posts: 15	Will you sell the GBE seperate?

13-11-2009, 18:05	#8
keefybaby82 Registered User Join Date: Oct 2009 Location: leicestershire Car: 620 TI Posts: 86	How much for the lowering springs? what make and how much lower are they than standard?

13-11-2009, 22:07	#10
SIMPLY SI Not out of my league!!! Join Date: Mar 2008 Location: TONBRIDGE/paddock wood Car: Rover BRM: No.258, Build date: 30/03/1999. Posts: 3,762	just to let you all know.......................Last Activity: 30-12-2008 11:45

14-11-2009, 01:55	#11
Daf200 Registered User Join Date: Oct 2008 Location: Colchester Car: Rover 200vi Posts: 97	Hello mate, How much for the bmc cda posted?

26-11-2009, 14:04	#13
rnash2002 Registered User Join Date: Jul 2004 Location: Norwich Car: 220 gsi turbo Posts: 155	LMAO!!! this is well and truly been scrapped,probably over in china in a building hehe.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)