MG-Rover.org Forums banner

1 - 3 of 3 Posts

·
Registered
rover_25
Joined
·
412 Posts
Discussion Starter #1
as per the title, replaced the battery in the fob and now it won't work! only have the one fob for the car, tried 2 different batteries. have tried a couple of different techniques to no avail.

its a 220 nasp, 95, 3tx fob, the boot open light has been on for a while, neither door swich works. central locking doesn't work off the key or inside the car. whenever i put the key to position 2 the alarm sounds.

any advice would be very useful.
 

·
Registered
Joined
·
10,157 Posts
Sometimes the fobs need re-syncing to the car if the battery has been changed. I can't remember the procedure but it's fairly simple - try searching for it.
 
1 - 3 of 3 Posts
Top