MG-Rover.org Forums banner

1 - 2 of 2 Posts

·
Registered
rover_200_95_99
Joined
·
61 Posts
Discussion Starter #1
just purchased a set of the cosmos wheels, from a brm, for my standard 200, and have found out i won't be able to use my old wheelnuts (has steel wheels at the minute), so would like to check if the nuts for these wheels need to be the tapered or radius type?
Don't have the wheels yet but would like to be able to fit them as soon as they arrive!

thanks
 
1 - 2 of 2 Posts
Top