MG-Rover.org Forums banner

1 - 4 of 4 Posts

·
Registered
cityrover
Joined
·
15 Posts
Discussion Starter #1
I haven't been working on this car for very long but I've found that working on the car is a series of annoying bolts that are a ***** to get to.

The bolt in question is the timing belt cover. It's the lowest bolt I've tried taking off the inner wheel arch protection. Tried taking off the protective plastic underneath. Tried with a socket and spanner still no avail.

Any tips would be greatly appreciated.



Sent from my SM-G900F using Tapatalk
 

·
Registered
ROVER 25 and a ROVER CABRIOLET
Joined
·
35,804 Posts
Go onto the 200/400 Owners Club and post up your issue on there,
should get a quick response. ;)
 
1 - 4 of 4 Posts
Top